Product Description:
LNK-IMC208-2.5GM-SFP+ is the L2+ managed 8-port 10/100/1000M/2.5G Base-T + 2-port 1.25G/2.5G/10G SFP+ Base-X hardened Ethernet switch. The Switch has 8 TP ports and 2 fiber ports. The TP (RJ45) supports 10/100/1000M/2.5G Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X connection; the SFP Base-X port supports 1 or 2 core Single-mode or Multi-mode fiber. With its reliable design and ease of use, the product is a great choice for integrating networks consisting of network devices such as IP cameras and wireless access points between remote locations.
Features:
► Support 8x10/100/1000M/2.5G Base-T + 2x1.25G/2.5G/10G SFP+ Base-X SFP
► 10/100/1000M/2.5Gbps RJ45 Port supports Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX
► Support connecting USB-C port for easy management, without the need to access the RS232 serial port at all
► IEEE 802.3az Energy Efficient Ethernet (EEE)
► IP40 Aluminum Case
► Supports DIN-Rail installation
► -40°C to 80°C (-40°F to 176°F) operating temperature
Technical Parameters:
| Ethernet |
| Standards: | IEEE802.3 10BASE-T |
| IEEE802.3u 100BASE-TX/FX |
| IEEE802.3ab 1000BASE-T |
| IEEE802.3z 1000BASE-X |
| IEEE802.3bz 2.5Gbps |
| IEEE802.3p QoS |
| IEEE802.1d Spanning Tree |
| Forward & Filtering Rate: | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) |
| 1,488,000pps (1000Mbps) |
| Packet Buffer Memory: | 12M bits |
| Processing Type: | Store-and-Forward |
| Backplane bandwidth | 110Gbps |
| Max Packet Length: | 9K Bytes Jumbo Frame |
| Address Table Size: | 8K MAC Addresses |
| Interface |
| Connector: | 8 x RJ45 |
| Optical Port: | 2 x 1.25G/2.5G/10G SFP+ |
| USB-C: | 1 x USB-C (for Management) |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF | > 200,000 hrs |
| Electrical and Mechanical |
| Input Power: | 12~48V DC, Redundant Power (6-pin Terminal Block) |
| Power Consumption: | 8W Max |
| Protection: |
| Power Input Overload: | Automatic Resettable |
| Reverse Polarity: | Present |
| DIP Switch |
4-digit DIP switch function | DIP | Function | Settings |
| SW 1 | VLAN | ON - Enabled | OFF - Disabled |
| SW 2 | Ring Management | ON - Enabled | OFF - Disabled |
| SW 3 | Reserved | ON - Reserved | OFF - Reserved |
| SW 4 | Reserved | ON - Reserved | OFF - Reserved |
| LED Indicators: |
| PWR: | Power Status |
| Ethernet (Per Port): | Link/Activity |
| Fiber: | Gigabit SFP Port: F9~F10 |
| Dimensions (WxDxH): | 149 x 114 x 50 mm |
| Weight: | 0.55Kg |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail mount |
| Software Features |
| Redundancy Protocols | Support STP/RSTP/MSTP/ERPSv2, Link Aggregation |
| Multicast Support | Support IGMP Snooping V1/V2/V3,support GMRP, GVMP,802.1Q |
| VLAN | Support IEEE 802.1Q 4K VLAN,support QINQ, Double VLAN, |
| Time Management | SNTP |
| QOS | Flow-based redirection Flow-based rate limiting
Flow-based packet filtering
8*Output queues of each port 802.1p/DSCP priority mapping
Diff-Serv QoS, Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR) |
| ACL | Port-based Issuing ACL ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message.
Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc |
| Diagnostic Maintenance | Support port mirroring, Syslog, Ping |
| Management Function | Support CLI, WEB, SNMPv1/v2/v3, Telnet server for management, EEE, LLDP, DHCP Server/Client (IPv4/IPv6), Cloud/MQTT |
| Alarm Management | Support 1 way relay alarm output, RMON, TRAP |
| Security | Broadcast Storm Protection, HTTPS/SSLv3, AAA & RADIUS, SSH2.0 Support DHCP Snooping, Option 82,802.1X security access,
Support user hierarchical management, ACL access control list,
Support DDOS,port-based MAC filtering / binding, MAC black holes, IP source protection, Port isolation, ARP message speed limit |
| Advance Layer 2+ Features | IPv4/IPv6 Management Static Route |
| Regulatory Approvals |
| ISO9001, CE, RoHS, FCC |
| EN55022:2010+AC: 2011, Class A |
| EN 61000-3-2: 2006+A1: 2009+A2: 2009 |
| EN 61000-3-3: 2013 |
| EN55024:2010 |
| IEC 61000-4-2: 2008 (ESD) |
| IEC 61000-4-3: 2010 (RS) |
| IEC 61000-4-4: 2012 (EFT) |
| IEC 61000-4-5: 2014 (Surge) |
| IEC 61000-4-6: 2013 (CS) |
| IEC 61000-4-8: 2009 (PFMF) |
Applications:
Support and Services: Industrial Switch Technical Support and Services
We provide a range of technical support and services to help customers with their Industrial PoE Switch product. Our services include:
- Installation and setup assistance
- Troubleshooting and support
- Software and firmware updates
- Hardware repair and replacement
- Training and education
We also offer 24/7 live chat support and telephone support for customers who need additional assistance. Our team of experienced technicians can help you with any questions or problems you may have with your Industrial PoE Switch. For more information or to get started, please contact us.
Packing and Shipping:
Industrial Switch Packaging and Shipping:
- The Industrial Switches are packaged in robust carton boxes.
-
In order to ensure the safe and fast delivery of products, we use high-quality packaging materials to securely package the products. The outer packaging aims to protect the product from impact and vibration during transportation.
We also use reliable transportation methods such as UPS, FedEx, or DHL to ensure that products are delivered to their destination on time. In addition, we also provide tracking information so that customers can track their orders in real-time.
Ordering Information:
| Model | Description |
| LNK-IMC208-2.5GM-SFP+ | Industrial L2+ 8-Port 10/100/1000M/2.5G + 2-Port 1.25G/2.5G/10G SFP+ Managed Ethernet Switch |
| SFP Options | ► SFP+ module is to be purchased separately. |
| Mounting Options | ► Default DIN-Rail Bracket installed |
| Power Options | ► 24W/1A 24VDC DIN-Rail Power Supply. Open Wire for Terminal Block. |
| ► Power Supply is to be purchased separately. |
